Need a modification of this device?
We can customize the electronics, firmware, or branding of this model.
Add products by adding codes
Add a CSV file
Enter the product codes that you want to add to the cart in bulk (after a comma, with a space or from a new line).
Repeating the code many times will add this item as many times as it appears.
C10 - RS232 to RS485 Converter (3-Way 3kV Isolation)
Recommended
C10 - RS232 to RS485 Converter (3-Way 3kV Isolation)
- RS232/RS485 converter with full 3-way galvanic isolation (Power/Input/Output) for mission-critical applications.
Product Description
The Redisage C10 is the most advanced serial converter in the family, designed for harsh industrial environments where ground loops and voltage spikes are common. It provides full 3-way galvanic isolation (3000 VDC), meaning the RS232 port, RS485 port, and Power Supply are all electrically separated from each other.
It features ADDC (Automatic Data Direction Control), ensuring seamless data transmission without requiring software changes. Key features:
• Isolation: 3-Way (RS232 || RS485 || Power)
• Speed: Up to 115200 bps
• Power Supply: 12-30 VDC / 24 VAC
• Protection: ESD on signal lines
• Mounting: DIN Rail (1M width)
Technical Documentation
Datasheet (DTR):
⬇ Download C10 Datasheet
Knowledge Base:
🔗 doc.redisage.com
Brand
Symbol
C10
Producer code
5903949781076
Series
Warranty
Main data
Power voltage
24 V/AC
12-30 V/DC
Galvanic isolation
Three-Way 3 kV/DC
Power connector
Screw terminal
Work temperature range
-40°C to +75°C
Safety measures
ESD 4 kV / 8 kV
Burst
Surge
RF
LED
Tx
Rx
Power
Serial Ports
Number of ports
2
Port type
1x RS232
1x RS485
Connector type
Screw terminal
Transmission speed
115200 bps
Data bits
7
8
Stop bits
1
2
Enclosure
Width in standard modules S (17.5 mm)
1M
Length
98 mm
Height
56.4 mm
Width
17.5 mm
Mounting
DIN Rail
Ingress Protection Code
IP20
Standards and Certifications
Declarations of Conformity
CE
RoHS
EMC
LVD
Norms
61000-6-2 - Immunity standard for industrial environments
61000-6-4 - Emission standard for industrial environments
About C10
C10 – Maximum Protection for Serial Links
The C10 RS232 to RS485 Converter is the ultimate solution for industrial communication, offering complete electrical separation between connected devices. Unlike standard converters, the C10 utilizes a 3-way isolation architecture. This design eliminates potential differences between the PC/PLC ground, the field device ground, and the power supply ground, preventing current loops that often destroy electronic ports.
Equipped with a built-in microprocessor for Automatic Data Direction Control (ADDC), the C10 handles the timing of the RS485 bus automatically. This makes it fully transparent to software—simply plug it in, and it works like a standard COM port extension, but with industrial ruggedness.
Technical Specifications:- Conversion: RS232 (Tx, Rx, GND) to RS485 (2-wire A, B).
- Isolation: 3000 VDC (All ports isolated).
- Termination: Built-in 120 Ohm resistor (switchable).
- Application: PLCs, HMIs, Medical devices, Energy metering.
Ensure maximum reliability for your critical systems with the C10 converter. Check the detailed wiring diagrams in the technical documentation.
3 Year Warranty
Ask a question
Write your opinion
Not confirmed by purchase
Score: /5
